MASTER SWORD from Zelda Breath of the Wild (Life Size) (STL files for 3D printing)

0 ratings

This is the legendary Master Sword, also known as the Blade of Evil's Bane, from the Legend of Zelda series. This edition of the sword represents the Master Sword as seen in Links latest adventure “Breath of the Wild”. Because the several artworks of the Master Sword and the actual in-game graphics vary quite a lot, I decided to take only the in-game graphics as reference for my model. So, with these STL files you will get the most accurate, life size 3D printable “Breath of the Wild” Master Sword for your next costume! Or you can add it to your sword collection or just display it nicely in your room.

Features

• Life sized, when printed in the native scale

• Raised Triforce emblem on the blade

• The handle can be printed in two versions: Either with the grip wrap already in the printed model or without grip wrap, if you want to wrap it yourself (recommended – it is more work but it looks way better).

• The handle which needs to be wrapped has little guiding grooves where the grip wrap goes. It makes it easier to apply the grip wrap.

• For more stability and a more realistic feel you can put a 1m long and 6mm thick steel rod inside the sword (must be put in before final assembly).

• There are also two holes in every blade element to put in a Ø6x20mm dowel to prevent the elements from turning during assembly and gluing.

• Detailed scabbard for the Master Sword

• There are two holes in every scabbard element to put in a Ø4x20mm dowel to prevent the elements from turning during assembly and gluing (except for the tip: Ø4x10mm).

• Wall hanger for the Master Sword

Data

Length: 1242mm (1284mm with scabbard)

Width: 250mm

Hight: 72mm

The fully assembled sword with steel rod weighs around 560g (depending on your infill ratio).

Info

You purchase digital STL-files for 3D printing!

All files are tested and successfully printed with an FDM printer and assembled by me.

Min. printer build volume for the native scale: 200x200x200 (WxDxH)

The model was designed that all details are visible when printed with a 0.4mm nozzle. If you scale the model down you should consider a thinner nozzle.

For more pictures and to see the creation process please visit my Instagram and YouTube:

https://www.instagram.com/nerd_maker_engineer

https://www.youtube.com/c/DominicSchwarz

Mentioning me and my work in photos and videos you share using my files and the printed model is highly appreciated.

Licence

All files are for personal use only. By downloading my content, you accept this Agreement.

You are not allowed to distribute or sell the files nor the 3D prints. You are not allowed to make molds of my models. Any kind of mass production is prohibited. You are not allowed to edit my files or use portions of them to create and sell new Content.

You can cut or resize the files to fit your printer. But you can't distribute or sell those derivates (as the original files).

I want this!